Wood Doors Cookeville TN

Local resource for Wood Doors in Cookeville. Includes detailed information on local businesses that provide access to doors, wood doors, hinges, door, interior, exterior, custom, as well as advice and content on where to find manufacturers and websites for purchasing or customizing.

Budget Blinds of Cookeville
(866) 839-4770
599 Vickers Place, Ste F
Cookeville, TN

Data Provided By:
Lowe's #578
(931) 646-4100
510 Neal Street
Cookeville, TN
 
Lowe's
(931) 646-4100
510 Neal Street
Cookeville, TN
Hours
M-SA 7 am - 9 pm
SU 8 am - 7 pm

LOWE'S OF COOKEVILLE, TENN.
931 646-4100
510 NEAL STREET COOKEVILLE, TN, 38501
Cookeville, TN
 
Maddux True Value Hdw.
(931) 526-2135
319 E Spring St
Cookeville, TN
 
Mid-State Garage Doors
(931) 738-3667
243 Mayberry St
Sparta, TN

Data Provided By:
Williams Wholesale Sply Co Inc
(931) 528-6441
250 S Jefferson Ave
Cookeville, TN
 
SOUTHERN FASTENING SYSTEMS/Cookville
931-520-8377
1005 Humble Drive Cookville, TN, 38501
Cookville, TN
 
Fastenal- Cookeville
931-372-8565
1308 East Spring Street Cookeville, TN, 38501
Cookeville, TN
 
Potter's Ace Hardware
(931) 537-3312
615 W Main
Algood, TN
 
Data Provided By:

Tiny Door Hinges- Advent Calendar

The Advent Calendar (or Christmas Countdown Calendar) prototype is well on its way. The dado jig worked perfectly! Unfortunately though, my pre-holiday merriment was disrupted when I started to work out the hinge details. The doors on this piece are just under 1.5″ x 1.5″. With 25 of them to attach to the frame, regular hinges are just out of the question. Aaron and I batted some ideas back and forth and it seems that the easiest thing to do right now is simply use two small pins, above and below each door to act was pivot points.

You can see in this image, our main concern is the size of the door and the location of the pin. Obviously the trick is making sure the door clears the frame and opens freely. Aaron did a great job putting together these two samples that show a 1/8″ diameter pin (left) and a 3/32″ diameter pin (right). In both cases, the pin needs to be set closer to the front of the door to help the door swing more “naturally”, similar to what we’d expect from a standard hinge.

So that’s the plan so far, and frankly I feel like there should be a better solution. If you don’t order the little dowel pins pre-made, you’re going to have to cut about 50 little pins yourself. That’s a pain in the nether regions! And the smooth action of the doors will depend on some precision drilling. Nothing that can’t be handled with a few jigs and a little patience, but its not quite as “sim...

Click here to read the rest of this article from The Wood Whisperer


 
Copyright © 2006-2013 The Wood Whisperer. All rights reserved.
Designed and Developed by Underscorefunk Design